Jeep WILLYS MB

I have version-upped the "Jeep WILLYS MB" to v24.
https://marketplace.secondlife.com/p/Off-Road-Explorer-v24/1624491

New version has two colors( dark-green/sandy-tan ) switchable.

And I have started to send it to the customer who bought it ago ;))

JRF-1 Goose in U.S. Navy

I had received the request to re-make "Little Goose" from CoastGuard-type to another old-one.
Then I have choosed the model "Navy JRF-1 Goose" in early World War II paint scheme writen at below, @ the Palm Springs air Museum
http://en.wikipedia.org/wiki/Grumman_Goose

It is the transporter and not included the "Vice" :))

the Glider to KSW20_REZ_v20

I have version-uped the Glider to KSW20_REZ_v20.
The new is as below,,,
1) remove the automatic spoiler and gear under 10m height to enlarge the flexibility.
2) change the colors of release-lever and spoiler-lever as RL.
3) add the wind-sounds from canopy, gear and spoiler individual.
4) add three step difficulties selectable
5) add the acrobat-mode to make the Loop.
6) add a left-hand animation of pilot
7) add the chat-command "canopy open/close"
8) add the Yaw-stringer animated in front of the canopy
9) remake the spoiler to move two steps
10) decrease the script-time
11) add the alart-sounds selectable for the stall
12) add the motion of stall-dowm
13) change the floating text switchable

And I have started to re-send the version-up to the customer who bought it past :))

Adding the Stall-down motion to the Glider

I'm testing the Stall-down motion of the "KSW-20" which I'm remakeing ;)
When it was finished, I would like to send it to the customer who bought it past.

I have released a sea-plane

I have made it like "Grumman G21 Goose for Coast Guard", but 70% size of RL.
And named it straight "Little Goose" :)

He has these specifications
* Aileron, Rudder, Elevator are moveable alog key control
* Changeable control to Co-pilot
* Guest-mode is available
* Dynamic cameras are available for Pilot and Co-pilot individual
* Meter-HUD ( height, speed, up/down-rate ) is also included.

You can see and check it here.
http://slurl.com/secondlife/Yumix%20Canal/63/201/21/
http://slurl.com/secondlife/Feoktistov/20/90/21/
http://slurl.com/secondlife/Rolypoly/241/204/21/

Try to "Grumman G21 Goose" (4)

I had add the Oil Cylinder for Gears, the texture of the engine-cover and changed the rudder.
Then have stated the scripts :)

Try to "Grumman G21 Goose" (3)

It took 3 days to make the texture of body ..... ;(
Then I have added another parts which I had made befor.

orz,,,,
Position of Gear-Up is too high and I can't attach oil-sylinder...
Shape of rudder seems to be different...
Textures of wings and engine-cuver would be need...

It would take more than two weeks.
wooom,,,,,,,

Try to "Grumman G21 Goose" (2)

I have made the main part of body with 1 prim.
It take about one week ;)

The texture is temporary to check the distortion.

Am I enjyoing ??

Now let's try to make the roof ;)

Try to make "Grumman G21 Goose"

I have started to make the Flying-boat "Grumman G21 Goose".
At first, following curves of body with prims, then trace them into JW-Cad to use the Sculpt-studio.

Woom, how long does it take to finish........ :)

I have released 2-type sea-planes

1st type: "Sea Airing 30"---- The floats are fixed
2nd type: "Curtiss FBK" ----- Flying-boat type (wheels move up/dow)

They have these specification
* Aileron, Rudder, Elevator are moveable alog key control
* Changeable control to Co-pilot
* Guest-mode is available
* 10 pre-set colors are selectable
* Dynamic cameras are available for Pilot and Co-pilot individual
* Meter-HUD ( height, speed, up/down-rate ) is also included.

You can see and check it.
http://slurl.com/secondlife/Feoktistov/20/90/21/
http://slurl.com/secondlife/Rolypoly/241/204/21/

------------------------
SS of "Sea Airing 30"
------------------------






----------------------
SS of "Curtiss FBK"
----------------------

Another Curtiss

I found the chart of Curtiss-K :)
It is a Flying-boat and Biplane type.

I think it would be very comfortable to fly around USS by this plane.
Now I am re-designing the each positions and sizes.

I wonder how long does it take to complete this curtiss ;)

The View from Cockpit (2)

I have added Animations of pilot to the Glider which I have been creating.
Right hand of pilot moves along the Control-stick operations by the key.

Then it seems more real ;)

Training of scripts for the Glider

I operate the parts of glider by scripts as below,
1) retrieving the fore/back gears 5prims
2) retrieving the propera and engine unit 3prims
3) adjusting the position of control stick 1prim
4) operating the spoiler 1prim
5) radar 1prim
6) elevator 1prim
7) text of drive-mode upper the elevator 1prim

The home work from my teacher was "Use only 1 script in the root prim ! "
Woommm, very difficult ;(

I used to use scripts in the child-prim and link-messages.
Teacher said "Use new funciton llGetLinkPrimitiveParams from Server 1.38"

I had tried and tried for about 3 days.... :)
Then I have finised them in one script in the root prim.
It seems to become simple, becuase do not use link-messages :)

The Retrievable Engine for a Glider

I made the retrievable engine unite for the Glider.
The mode is selectable from "Towing-Plane" and "Retrievable Engine" ;)

The View from Cockpit

It becomes more difficult to drive vehicles with the view from cockpit.
But it would be able to feel more reality :)

At the Glider, outer view banks like MS Flight Simulator.
I added the over-head display to fly the glider only by this view :)

Towing-Plane for Glider

I was useing the towing-plane which I got from free-bees, so that I have made it with 24prims by myself.

Stability and power seem to be sufficient for heavy-use :)

Test Flight [2] "Towing"

The Glider can not fly-up by her-self, so that she needs to be towed up by another plane.
Well, I jyointed her the "Air Camper 626" for the towing test-flight :)